Today we discuss how to sharpen lawn and garden tools. Keeping your garden tools in good working order is essential for any gardener. Not only will it make your job easier, but sharpening them is also a great way to keep them lasting longer. Sharp tools cut cleanly with less resistance and are less likely to become damaged or dull quickly. Let’s take a look at how you can sharpen those lawn and garden tools!
how to sharpen lawn and garden tools:
Sharpening Pruning Shears and Loppers:
Pruning shears and loppers are one of the most commonly used garden tools, so they should be given extra attention when sharpening. Start by cleaning your tool with a rag before you begin sharpening. You will then need to clamp the tool in a vise so that the blades are exposed. Use a flat file or mill bastard file to sharpen the blades from both sides, starting from the base of the blade and working up toward the tip. It’s important to keep your strokes even on both sides of each blade; this will ensure an even edge on both sides of the blade. Once sharpened, use a wire brush or steel wool to remove any burrs left behind from filing.
Sharpening Spades and Shovels:
These tools require different techniques than pruning shears since they have more blunt edges that need reshaping rather than just sharpening. Start by laying out your spade or shovel on a flat surface so that its face is facing up. Then use an angle grinder fitted with either a diamond disc or grinding stone wheel to slowly grind down any nicks or burrs along its edge until it is smooth again; this should take around 5 minutes per side. Be sure not to press too hard on the grinding wheel as this could cause damage to the metal edges of your tool.
Finally, use a steel brush or steel wool to remove any remaining dust particles before returning it to storage. For axes, hatchets, mauls, etc., you’ll want to start by cleaning off dirt, debris, rust, and other buildup from their surfaces using sandpaper (for wooden handles) or wire brush (for metal surfaces).
Next, secure your axe in a vise before using a mill bastard file (or similar) for sharpening edges; this may take several passes depending on how worn down they are—just remember not to over-sharpen!
Lastly, finish off with some oiling for better protection against rusting and future wear-and-tear as well as smoother operation when using them next time round!
The key takeaway here is that proper maintenance of your lawn and garden tools is essential for optimal performance—and part of that maintenance includes regular sharpening! By properly maintaining these tools through periodic cleaning plus occasional sharpening sessions (with an angle grinder if necessary), you can rest assured knowing that they’ll be ready-to-go whenever you’re ready for action in the garden! Taking care of your garden tools doesn’t have to be intimidating – armed with these tips you can easily sharpen them like a pro! Thanks for taking time out of your day to read our blog post today – we hope it was helpful! Have a great day!
How to Care For and Sharpen Gardening Tools